The suppressor, redesigned from the physics.

Future Armaments Research quantifies acoustic, thermal and point-of-impact behavior, then optimizes suppressor geometry with an AI-native engineering process.

The approach

A century of the same design. Until now.

Most suppressors still run on a core design patented in 1909: a tube of stacked baffles that traps and slows expanding gas.

A few companies have adopted new geometries made with 3D printing, but the design work is still largely guesswork. We took a different route. We built the instruments and software to measure what a suppressor does, shot by shot, and let that data drive the geometry.

01

Measure

Purpose-built acoustic and thermal test harnesses capture every shot on the range.

02

Model

Computational fluid dynamics and finite element analysis simulate gas flow, heat and structure.

03

Optimize

AI agents tune lattice shape, cell size and wall thickness against the measured results.

04

Print

Additive manufacturing produces lattice geometries no machine shop would draw.

Performance

Quantify the physics. The performance follows.

Acoustic

We record the full pressure waveform of each shot, not a single headline number. A proprietary form of gyroid lattice drains sound energy as heat, and our analytic software optimizes it until the measured peak drops.

What we measure
Peak sound pressure level and waveform, shot by shot.

Thermal

Every test string is filmed in infrared. The lattice gives hot gas more surface to shed heat, and an optional carbon fiber cover insulates the core while the Venturi effect draws air across cooling fins.

What we measure
Surface temperature peak and dissipation rate, by infrared camera.

Point of impact

Adding a suppressor changes where a rifle shoots. We measure that shift against the unsuppressed baseline and optimize mass and gas-flow symmetry so it stays small and repeatable.

What we measure
Point-of-impact shift, suppressed against unsuppressed. Total weight and weight distribution.
Incoming wave and gas, partial interference within the lattice, transmitted waves and gas.

How our custom lattice design quiets a shot

Each cell of the lattice forms two new channels. As channels branch and rejoin, an incoming wave splits into many sub-waves that travel different distances. When they meet again they are out of step, and partly cancel each other.

Centauri suppressor core, a printed cylinder with fine layered ribbing
The product

Centauri

Quieter, cooler, and lower in backpressure.

Proprietary lattice core. A custom gyroid geometry, tuned for shape, cell size and wall thickness by FAST, our Firearms Analytics and Simulation Toolkit.
Forward-flow porting. Spiral-flow ports send gas forward, reducing venting near the shooter's face.
Optional carbon fiber cover. Insulates the core for safer, faster handling.
Two rifles on a steel fixture table, each fitted with a Future Arms suppressor with a lattice-patterned body
Early production units, shown without carbon fiber covers.
The platform

FAST: Firearms Analytics and Simulation Toolkit

FAST connects our physical test harnesses, CAD, simulation and optimization, and additive manufacturing into one loop, orchestrated by AI agents. The result is fact-based product design that keeps learning with every test.

An engineer at an outdoor range bench reviewing infrared camera output on a laptop
Thermal measurement on the range.
FAST acoustic analysis screen showing a sound pressure waveform over time with its peak marked
FAST analytics: an acoustic waveform from a single shot.
Who we are
Made in Michigan
Veteran-owned

Our products are designed by veterans who have relied on weapons in real world deployments. We understand the practical side of reliable, simple, and easy-to-maintain suppressors.

Contact

CONNECT WITH SALES

Whether you are buying one suppressor or stocking a store, send us a note. Please use the form or contact sales@futurearms.us.

I am a
Careers

Join the mission

We are reinventing how defense products are engineered: connecting physical and digital in one loop. Our process and toolchain rapidly turns creative innovation into measured facts and practical products. We need exceptional engineers to build our new, AI-native approach to engineering R&D.

An engineer at an outdoor range bench reviewing infrared camera output on a laptop
Open role

AI & SOFTWARE ENGINEER, FAST PLATFORM

Grand Rapids, Michigan · Full-time
Apply

About FAST

FAST is the Firearms Analytics and Simulation Toolkit, our AI-native engineering platform. FAST accelerates product development by integrating formerly disconnected steps and tools: acoustic and thermal test harness, CAD in nTop and SolidWorks, computational optimization with CFD and FEA, and design for additive manufacturing.

We use Claude agents and Claude Code, as well as OpenAI and Gemini models and tools where they bring specific capabilities.

What you will build

  • Capture pipelines that move acoustic and thermal test data from the range into a queryable record.
  • Analytics that turn pressure waveforms and infrared video into comparable performance metrics.
  • Agent workflows that set up, run and summarize simulation and design studies.
  • Optimization loops that connect measured results to lattice geometry.
  • QA analytics for DFAM: design for additive manufacturing (3D printing).
Skills

What we are looking for

Strong software engineering comes first. Depth in two or more of the other areas is what makes someone a fit.

Core engineering

  • Python 3 with type hints and pytest
  • Docker and Linux
  • Building and deploying on the Microsoft Azure platform
  • PostgreSQL and schema design for experiment data
  • Service APIs with FastAPI or similar

Data and signal processing

  • NumPy, SciPy, and pandas or Polars
  • Impulse waveform analysis: filtering, FFT, peak and energy metrics
  • Radiometric thermal image and video processing
  • Statistics for small test samples: uncertainty, repeatability, design of experiments

Test harness and instrumentation

  • Data acquisition from high-sample-rate pressure and acoustic sensors
  • Sensor calibration, metadata and traceability
  • Reliable capture from a range laptop to the database

Agentic AI

  • Agent workflows on the Claude API and Claude Code
  • Tool use, MCP servers and structured outputs
  • Evaluation harnesses for agent results
  • Human review gates on engineering decisions

Simulation automation

  • Scripted CFD and FEA runs and post-processing (OpenFOAM, Ansys or comparable)
  • Meshing automation 
  • Job orchestration on workstations, HPC or cloud
  • Correlating simulation with range data

Computational design and additive

  • Parametric and implicit modeling: nTop, SolidWorks API
  • TPMS and gyroid lattice generation
  • Bayesian, surrogate-model and multi-objective optimization
  • Design for metal additive manufacturing and build preparation

Good to have

  • A degree in a STEM subject. However, real-world achievement and character mean more to us than credentials
  • Curiosity about physics, AI, and advanced manufacturing and how to practically translate innovation into products
  • Experience with compressible flow or acoustics
  • Firearms, aerospace or defense hardware experience
  • Military service

Apply

Send a résumé and a link to something you have built to sales@futurearms.us.

US persons only. Candidates must meet criteria for a federal security clearance.